Quick answer: choose a banner at least 1 ft shorter than the fence so it hangs flat inside the frame. On a 4-ft fence, use a 3x6, 3x8, or 3x10. On a 6-ft fence, use a 4x8, 4x10, or 5x10. For long construction fences, go up to a 5x20.
Fence Banner Sizes at a Glance
| Fence height | Common use | Banner sizes that fit |
|---|---|---|
| 4 ft | Ballfield outfields, school and park fences, yards | 3x6, 3x8, 3x10, 3x12 |
| 6 ft | Commercial lots, construction sites, sports complexes | 4x8, 4x10, 5x10, 4x20, 5x20 |
| 8 ft | Backstops, tennis courts, security fences | 6x10, 6x20 |
Fence heights vary. Measure from the top rail to the ground and leave a few inches at the top and bottom.
Find Your Fence Banner Size
How Much Shorter Than the Fence?
Leave at least 6 inches above and below the banner. That gives you fence wire to tie to along the top and bottom edges, keeps the banner off wet grass and mud, and lets it hang flat instead of bending over the top rail.
Sponsor Banners for Ballfields
- Pick one size for every sponsor. Matching banners look organized and make it easy to price sponsorship levels.
- 3x6 and 3x8 fit most 4-ft outfield fences; a 4x8 works on taller fences and for top sponsors.
- Size the logo for the bleachers. Outfield banners are read from 150 ft or more, so keep text to the sponsor’s name and logo. Check with the letter height calculator.
See stadium banners for more ideas.
Construction and Commercial Fences
Long fences along a road are a big, low-cost advertising space. A 4x20 or 5x20 on a 6-ft fence reads from the street; for “Coming Soon,” “Now Leasing,” or “Now Hiring,” a 4x8 or 4x10 is often enough.
Finishing for Fence Banners
- Hemming plus grommets: the best choice outdoors. Hemmed edges hold up to wind, and grommets give you tie points along every edge.
- Wind slits: small cuts that let air pass through and reduce strain on the fence and grommets. Recommended for large single-sided banners in open areas. See banners with wind slits.
- Single-sided: fence banners face one direction, so you don’t need double-sided.
How to Hang a Banner on a Chain-Link Fence
- Tie the top corners first with zip ties, pulling the banner level.
- Tie the bottom corners, pulling down just enough to make it flat.
- Tie every remaining grommet, working from the center out so the banner stays tight and doesn’t wrinkle.
- Check it after windy days and replace any broken ties.
Prefer something easier to remove? Ball bungees work well for banners you take down after each game. See how to hang a vinyl banner.
Prices
Current starting prices:
Fence Banner FAQ
What size banner fits a 4-ft fence?
A 3-ft-high banner, such as a 3x6, 3x8, or 3x10, leaves room at the top and bottom to tie it flat.
What size banner fits a 6-ft fence?
A 4x8 is the classic choice; a 5x10 gives you more space for bigger letters.
What size are baseball sponsor banners?
Common sponsor banner sizes are 3x6, 3x8, and 4x8, depending on fence height. Pick one size for all sponsors so the outfield looks uniform.
Do fence banners need wind slits?
Large banners on open fences benefit from them, since wind slits reduce strain on the fence and grommets. They’re available on single-sided banners.
Related Guides
See all banner guides.
