Quick answer: on a 10x10 canopy tent, a 7x10 fills a back or side wall, and a 2x10 or 3x10 works as a header across the front. If your tent sits lower, a 6x10 wall leaves room at the bottom. Add a 2x6 on the front of your table for a complete setup.
Canopy Tent Banner Sizes at a Glance
| Where on the tent | 10x10 tent | 10x20 tent |
|---|---|---|
| Back wall | 7x10 or 6x10 | 7x20 or 6x20 |
| Side wall | 7x10 or 6x10 | 7x10 or 6x10 |
| Front header | 2x10 or 3x10 | 2x20 or 3x20 |
| Table front | 2x6 for a 6-ft table, 2x8 for an 8-ft table | |
Most pop-up canopies are 10 ft wide and about 7 ft high to the top of the frame, but leg heights adjust and brands vary. Measure your tent before you order.
Find Your Tent Banner Size
Back and Side Walls
A wall banner turns the open frame into a sign people see from across the event. A 7x10 fills a 10-ft side at full height; a 6x10 leaves a foot at the bottom, which helps if you set the legs lower or want airflow underneath. Put your name and logo in the top half, since tables and people block the bottom.
Front Headers
A header hangs from the front top bar, where it’s visible over the crowd. A 2x10 is the most common choice. A 3x10 gives you bigger letters, but it hangs lower, so use it where customers stay at the table rather than walking in under it. If your tent is in the middle of a market, a double-sided header reads from both directions (double-sided is available up to 3x10).
How to Attach Banners to a Canopy Tent
- Ball bungees or bungee cords through the grommets and around the frame: quick to put up and they give a little in the wind.
- Zip ties hold tighter for all-day or multi-day events; bring scissors to take them down.
- Tie the bottom corners to the legs too, so wall banners don’t flap.
See more methods in how to hang a vinyl banner.
Outdoor Tips
- Choose hemming plus grommets for outdoor tent banners; hemmed edges hold up better to wind.
- Consider wind slits on large single-sided wall banners in open, windy spots. See banners with wind slits.
- Weigh down the tent. A wall banner catches wind like a sail, so use tent weights on every leg.
Prices
Current starting prices:
Canopy Tent Banner FAQ
What size banner fits a 10x10 tent?
A 7x10 for a back or side wall, and a 2x10 or 3x10 as a front header.
What size banner fits a 10x20 tent?
A 7x20 for the long back wall, 7x10 banners for the sides, and a 2x20 header across the front.
How do I hang a banner on a pop-up tent?
Run ball bungees or zip ties through the grommets and around the frame, and tie the bottom corners to the legs so the banner stays flat.
Will a 7x10 banner touch the ground?
On a tent about 7 ft high to the frame, a 7x10 reaches about to the ground. If your tent is set lower, choose a 6x10.
Related Guides
See all banner guides.
